Kramer Electronics VS-66H3 - Manual (Page 19)

Upgrading the Firmware
KRAMER: SIMPLE CREATIVE TECHNOLOGY
16
7.6.2 Connecting the Ethernet Port via a Network Hub
You can connect the Ethernet port of the VS-66H3 to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45
connectors.
8 Upgrading the Firmware
For instructions on upgrading the firmware see the “STC Firmware
Upgrade” document.
9 Technical Specifications
The VS-66H3 technical specifications are shown in Table 3 .
Table 3: Technical Specifications 1
INPUTS:
of the VS-66H3 6x6 HDMI Matrix Switcher
6 HDMI Connectors
OUTPUTS: 6 HDMI Connectors
BANDWIDTH: 2.25Gbps bandwidth per graphic channel
COMPLIANCE WITH
HDMI STANDARD:
HDMI and HDCP
RESOLUTION: Up to UXGA; 1080p
POWER SOURCE: 100−240V AC, 50/60Hz, 33VA
CONTROLS: Front panel buttons, infrared remote control transmitter, RS-232, Ethernet
DIMENSIONS: 19” x 10.9” x 1U (W, D, H)
WEIGHT: 2.1kg (4.6lbs) approx.
ACCESSORIES: Power cord, IR transmitter, rack ”ears”
OPTIONS: Kramer HDMI cables 2
10 Default EDID
, external remote IR receiver cable
Monitor
Model name............... VS-66H
Manufacturer............. KRM
Plug and Play ID......... KRM0200
Serial number............ 1
Manufacture date......... 2010, ISO week 24
-------------------------
EDID revision............ 1.3
Input signal type........ Digital (DVI)
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 700 x 390 mm (31.5 in)
Power management......... Not supported
Extension blocs.......... 1 (CEA-EXT)
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics
C-FOHM/FOHM series