Kramer Electronics VS-311H - Manual (Page 9)

6 VS-311H - Overview
# Feature Function
13 IN HDMI Connectors Connect to the HDMI sources (from 1 to 3)
14 ETHERNET Connector Connect to the PC or other Serial Controller
through computer networking
15 FACTORY RESET Button Press the ETHERNET factory reset button to reset
to the factory default definitions:
IP number

192.168.1.39
Mask – 255.255.255.0
Gateway – 192.168.1.1
First, disconnect the power and then connect it again
while pressing the RESET button. The unit will power
up and load its memory with the factory default
definitions
16 12V DC +12V DC connector for powering the unit