Kramer Electronics VS-311H - Manual (Page 8)

VS-311H - Overview 5
3.1 Defining the VS-311H Automatic HDMI/Audio Switcher
This section defines the VS-311H.
Figure 1: VS-311H Automatic HDMI/Audio Switcher
# Feature Function
1 IR Receiver The red LED lights when receiving signals from the
infrared remote control transmitter
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 INPUT SELECT Buttons Press the INPUT button to select the input to
switch to the output (from 1 to 3). The selected
input button illuminates
4 Audio
Line BALANCED OUT Terminal
Block Connector Connect the balanced stereo audio output to a
balanced stereo audio acceptor
5 OUT 3.5mm Mini Jack Connect to an unbalanced stereo audio output
6 IN 3.5mm Mini Jack Connect to the unbalanced stereo audio inputs
(from 1 to 3)
7 Audio
S/PDIF OUT RCA Connector Connect to a digital audio (S/PDIF) output
8 IN RCA Connectors Connect to the digital audio (S/PDIF) inputs (from
1 to 3)
9 RS-232 9-pin D-sub Connector Connect to the PC or the Remote Controller
10 PRIORITY SETUP DIP-switches DIP-switches for setup of the machine: DIPs 1, 2
and 3 are for setting the signal priorities; DIP 4 is
for setting to the manual or the AUTO mode (see
Section 4.1 )
11 REMOTE Terminal Block Connects to a contact closure switch (see
Section 4.3 )
12 OUT HDMI Connector Connect to the HDMI acceptor