Kramer Electronics VP-8x4 User Manual
Page 21
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-4x8 8x4 VGA / UXGA Matrix Switcher
18
To confirm several actions (in the Confirm mode), do the following:
1. Press each OUT-IN combination in sequence.
The corresponding 7-segment Display blinks. The TAKE button also
blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding 7-segment Display no longer blinks. The TAKE button
illuminates.
7.3 Storing/Recalling Input/Output Configurations
You can store and recall up to 12 setups
1
using the eight input buttons and the
four output buttons, as Figure 8 illustrates:
Figure 8: Storing and Recalling using the Input/Output Buttons
7.3.1 Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button blinks.
2. Press one of the 12 INPUT/OUTPUT buttons (this will be the setup # in
which the current status is stored). If in the Confirm mode, press the
blinking TAKE button to confirm the action.
The memory stores the data at that reference.
7.3.2 Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate INPUT/OUTPUT button (the button # corresponding
to the setup #). If in the Confirm mode, that setup configuration will blink
in the 7-segment Display, together with the RCL button and the TAKE
button, and will only be implemented after pressing the TAKE button.
The memory recalls the stored data from that reference.
1 OUT 1 is used for setup # 1 and IN 1 is used for setup # 5