Kramer Electronics VP-4x8AK - Manual (Page 38)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling via the Embedded Web Pages
34
9.4 The Configurations Page
The CONFIGURATIONS page lets you view some Ethernet settings
1
Figure 28
and
change others (see ).
To change CONFIGURATION definitions:
1. Click CONFIGURATIONS. The CONFIGURATIONS Web page appears.
2. Change the definitions as required.
3. Click the Submit button to apply changes
2
4. Click Yes.
A window appears announcing that the configuration has been successfully
changed.
. A window appears asking if you are
sure you want to change the network settings.
5. Click OK
6. If the IP number had been changed, close the browser and reload the Web page.
Figure 28: CONFIGURATIONS Embedded Web Page
HELP BOX ?
This page lets you view and set the device configuration.
1 The model name, serial number, firmware version and MAC address
2 Or Cancel to cancel changes