Kramer Electronics VM-24HC - Manual (Page 9)

6 VM-24HC - Connecting the VM-24HC
4 Connecting the VM-24HC
Always switch off the power to each device before connecting it to your
VM-24HC. After connecting your VM-24HC, connect its power and
then switch on the power to each device.
To connect the VM-24HC as illustrated in the example in Figure 2 :
1. Connect the two HDMI sources, for example, a DVD player and a set top
box to the INPUT 1 and INPUT 2 connectors, respectively.
2. Connect the HDMI OUTPUT connectors to up to 4 HDMI acceptors. In this
example, connect:
Not all outputs need be connected.
 OUTPUT 1 to display device 1 (for example, an LCD TV)
 OUTPUT 2 to display device 2 (for example, an LCD TV)
 OUTPUT 3 to display device 3 (for example, an LCD TV)

OUTPUT 4 to display device 4 (for example, a plasma display)
3. If required, connect a PC and/or controller to the RS-232 port (see
Section 5.1 ).
4. Connect the power adapter to the device and to the mains electricity (not
shown in Figure 2 ).
5. If required, acquire the EDID (see Section 5.3 ).
i