Kramer Electronics RC-IR2 - Manual (Page 7)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your RC-IR2 Remote Control Transmitter
4
Table 1: RC-IR2 Remote Control Transmitter Features
Keys Function
ROUTER Mode 20 buttons for selecting the channels, the group, the machine number, machine
type and so on (see section 7)
Source
Selector
18 source selector keys: AV1, AV2, AV3, AV4, YC1, YC2, YC3, YC4, COMP1,
COMP2, COMP3, COMP4, VGA1, VGA2, VGA3, VGA4, DVI1 and DVI2
FREEZE Pauses the output video
Selector
Buttons
SCALER
Mode
OUT Selects the output resolution
STO Stores the current setting
RCL Recalls the stored data
- Single Digit Mode Press the - key to select the single digit mode (the 0/10 key is designated as 10)
-- Double Digit Mode Press the - - key to select the double digit mode (the 0/10 key is designated as 0)
GROUP Selects the # of a specific group (see section 7.2.2)
LOCK Locks a unit or all the units
Auto Image Assesses the image and automatically improves its quality via phase, frequency
and position adjustment
Auto Gain Automatically adjusts the brightness and contrast
MODE For the VP-719xl, VP-720xl, VP-723xl and VP-724xl: Toggle between each of
the following modes: Normal, Presentation, Cinema, Nature, User 1 and User 2
For the VP-725DS and VP-725DSA: Toggle between each of the following
groups: video, audio, video and audio, scaler, master, and scaler and master
SCALE Toggles between each of the following Aspect Ratios:
Normal, Wide Screen, Pan & Scan, 4:3 Output, and 16:9 Output
Navigation Control
(5 keys)
Allows maneuvering within an OSD screen (all keys); adjusts the zoom position
(4 keys); moves the PIP location when the Source Prompt is OFF (4 keys);
resizes the PIP when the Source Prompt is ON (2 keys)
PIP Toggles the picture-in-picture function
SWAP Toggles between the PIP content and the screen source content
BRIGHT Displays the brightness status (adjust using the / keys)
CONT Displays the contrast status (adjust using the / keys)
VOL- Decreases the volume 1 . When in the SCALER mode, see section 8.1
VOL+ Increases the volume 1 . When in the SCALER mode, see section 8.1
ROUTER Enables the switcher functions (keys are colored white)
SCALER Enables the scaler functions (keys are colored blue)
MENU Displays the OSD Menu screen and locks/unlocks the front panel
ALL Pressing ALL before pressing an INPUT key, connects that input to all
outputs 2 (ALL= All Outputs)
OFF Pressing OFF after pressing an OUTPUT key disconnects that output from the
input. To disconnect all the outputs, press the ALL key and then the OFF key
ESC Press ESC to cancel the last key(s) pressed (when the action requires
another key)
TAKE Press TAKE, key-in several actions and then press TAKE once again to
simultaneously activate the multiple switches
VIDEO Affects video (the default)
AUDIO Affects audio
AFV Audio-follow-video
1 See section 7.4.1.2 when adjusting the volume for the VP-23N and the VP-23RC
2 For example, press ALL and then Input key # 2 to connect that input to all outputs