Kramer Electronics RC-IR2 - Manual (Page 16)

The Router Mode Keys
13
7.3.4 The TAKE Key
You can use the TAKE key to key-in several actions and then confirm them
by pressing the TAKE key, to simultaneously activate the multiple switches.
Otherwise:
OUT-IN combinations can be executed one at a time
Pressing an OUT-IN combination implements the switch immediately
No protection is offered to allow the correction of an erroneous action
before it is implemented
The TAKE key on RC-IR2 can be used regardless of the state of the TAKE
button on the switcher.
7.3.4.1 Confirming a Switching Action
To confirm an action, using the TAKE key, point the remote control
transmitter at the remote receiver and do the following:
1. Press the TAKE key
2. Press one or more OUT-IN combinations in sequence.
3. Press the TAKE key to confirm and implement the action.
7.3.5 The VIDEO, AUDIO and AFV Keys
You can switch stereo audio signals in one of two ways, either:
Audio-follow-video (AFV), in which all operations relate to both the
video and the audio channels; or
Breakaway, in which video and audio channels switch independently
7.3.5.1 Setting the Audio-Follow-Video Option
To set the Audio-follow-video (AFV) option, press the AFV key:
If the AUDIO and VIDEO configurations are the same, then the AFV
button illuminates. The audio will follow the video
If the AUDIO differs from the VIDEO, then Press the TAKE button to
confirm the modification. The audio will follow the video
7.3.5.2 Setting the Breakaway Option
To set the Breakaway option:
Press the VIDEO (for video control only) key. The VIDEO button on the
machine illuminates, and switching operations relate to Video
Press the AUDIO (for audio control only) key. The AUDIO button on the
machine illuminates, following audio switching operations