Kramer Electronics RC-IR2 - Manual (Page 5)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The high performance Kramer RC-IR2 is an upgrade of the popular RC-IR1,
with additional functionality that lets you control Kramer scalers as well as
switchers.
The
RC-IR2:
Is a hand held infrared remote control transmitter 1 that includes the
protocols of all Kramer devices and is programmable to control any
Kramer machine (see Figure 1)
Transmits to a compatible remote receiver, either built-in (see Figure 2) or
external (see Figure 3). The transmitter includes non-volatile memory that
retains the last setting, even after the power supply is interrupted
To achieve the best performance:
Point the remote control transmitter directly at the remote receiver
(whether built-in or external)
Make sure that nothing blocks the path of the infrared beam 2
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer RC-IR2
away from moisture, excessive sunlight and dust
1 Delivers instantaneous results and has a range of up to 15 meters
2 For example, do not place a group of switchers in front of the remote receiver. This may prevent it from receiving signals
from the remote control transmitter