Festo Контроллер крайних положений SPC11 - Manual (Page 22)

1. Summary of components
1-10 Festo P.BE-SPC11-DGP-EN en 0012NH
Vertical fitting position
Drive length
i Valve type MPYE-... Screw connectors for Tube type PUN
in mm
MPYE-... DGP(I)(L)-...
DGP(I)(L)-63-...
225 MPYE-5-1/8-LF-010B QS-1/8-8 QS-3/8-8 PUN-8x1,25
300 MPYE-5-1/8-HF-010B QS-1/8-8 QS-3/8-8 PUN-8x1,25
360 to 450 MPYE-5-1/4-010B QS-1/4-10 QS-3/8-10 PUN-10x1,5
500 to 2000 MPYE-5-3/8-010B QS-3/8-12 QS-3/8-12 PUN-12x2
Proportional directional control valve (
5 )
see System manual type P.BE-SPC11-SYS...
The DGP(I)(L)-... is suitable for both slide operation and yoke
operation. Work connection 2 of the proportional directional
control valve must be wired to the drive connection on the
same side as the electrical connection for the potentiometer.