Festo Контроллер крайних положений SPC11 - Manual (Page 33)

2. Parameters of the SPC11 for DNCM-..-POT
2-7
Festo P.BE-SPC11-DNCM-EN en 0204NH
The parameters listed in the following tables match exactly
the specified combinations of valves, drives, mass loads and
mounting positions.
Please note
Faultless operation can only be guaranteed if all compo-
nents are fitted correctly.
• Use only the specified combinations of valves, drives
and mass loads.
• Observe the installation instructions in chapter 1 as well
as in the system manual.
• Do not loosen the mechanical connections betweeen the
standard cylinder housing and the measuring system
housing. When fitting the coupling plate observe the
instructions in the operating instructions for the
DNCM-...-POT.