Festo Контроллер крайних положений SPC11 - Manual (Page 19)

1. Installation instructions for the DNCM-...-POT
1-7
Festo P.BE-SPC11-DNCM-EN en 0204NH
Compressed air tubing and screw connectors (4)
See also system manual type P.BE-SPC11-SYS...
• Arrange the tubing between the valve (MPYE-5-...) and the
cylinder (DNCM-...) symmetrically.
Recommendation: Tubing length = cylinder length + 50 mm
• Select the tubing and the connectors as shown in the fol-
lowing table.
Horizontal fitting position
Stroke length
i Valve type MPYE-... Screw connectors for Tubing type PUN
in mm
MPYE-... DNC-...
DNCM-32-...-POT
100...400 MPYE-5-1/8-LF-010B QS-1/8-8 QS-1/8-8 PUN-8x1.25
500 MPYE-5-1/8-HF-010B QS-1/8-8 QS-1/8-8 PUN-8x1.25
DNCM-50-...-POT
100...250 MPYE-5-1/8-LF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
320...400 MPYE-5-1/8-HF-010B QS-1/8-8 QS-1/4-8 PUN-8x1.25
500 MPYE-5-1/4-010B QS-1/4-10 QS-1/4-10 PUN-10x1.5