EZ Dupe 5 Copy 3.5" SATA Hard drive Duplicator copies up to 60MB/s. Adapter is needed for 2.5 SATA HDD" - Manual (Page 9)

SATA HDD Duplicate Controller Manual
Once the scan is complete, the LCD will display the corresponding results
PreScan OK!
Attention: This is Function 3 of 1-1 HDD duplicator.
3.6 ReScan Bus
Choose option 6 from the menu:
6. ReScan BUS
Press ENT to re-scan hardware. The LCD will display the following info.
Re-Scan BUS NOW?
Yes
When the scan is complete the LCD will display the following info.
Bus re- scan OK!
Attention: This is Function 4 of 1-1 HDD duplicator.
3.7 Source Size
Source Size is used to show the capacity message of the source hard disk.
Choose option 7 from the menu:
7. Source Size
Press ENT and the LCD will show the following info.
HDD:Hitachi
Size:232.9GB
Then press ENT and the LCD will show the data's size info.
HDD:Hitachi
Data:200.9GB
Attention: This is Function 5 of 1-1 HDD duplicator.
3.8 Set up
Setup allows various system settings to be changed. There are 13 sub-options: Language, Copy
Size, Startup Menu, Auto Compare, Button Sound, Device Info, System Info, Fast Copy, Auto
Start Drive, Auto Start Timer, Tolerance Size, BootTime Delay and Quick Compare.
Choose option 8 from the menu:
8. Setup
Attention: This is Function 6 of 1-1 HDD duplicator.
8