EZ Dupe 5 Copy 3.5" SATA Hard drive Duplicator copies up to 60MB/s. Adapter is needed for 2.5 SATA HDD" - Manual (Page 10)

SATA HDD Duplicate Controller Manual
3.8.1 Language
This option is used to select the system's language support. By default this is set to English. Press
ENT to change the Language settings.
3.8.2 Copy Size
Language
English
This option is used to specify the size of the source hard disk for simplifying further copying
operations.
8-02. Setup
Copy Size
Press ENT and the LCD will display a detailed list of options as shown below
Copy Size
100%~1% (*MB)
Use the Up and Down arrow keys to choose different copy sizes. The system will offer their
corresponding percentages so the user can specify the amount to copy from the source hard disk.
Press
ENT to confirm and save the changes.
3.8.3 Startup Menu
This option allows you to set an option other than "Setup" to be displayed as the first available
option on the menu every time you start the system.
8-03. Setup
Startup Menu
Press ENT then use the Up and Down arrow keys to choose other options. By default the first
menu option is Copy HDD.
Startup Menu
1. Copy HDD
3.8.4 Auto Compare
This option automatically compares the source hard disk with the target hard disk after a copy
operation is completed.
8-04. Setup
Auto Compare
Press ENT to access option. By default it is set to Off. Use the Up and Down arrow keys to choose
On.
Auto Compare
Off
9