EZ Dupe 5 Copy 3.5" SATA Hard drive Duplicator copies up to 60MB/s. Adapter is needed for 2.5 SATA HDD" - Manual (Page 18)

SATA HDD Duplicate Controller Manual
3.10.11 Link Option (for USB mode) – requires AEC-4420DX (1-1 HDD duplicator
only)
This function is used to decide if 7. USB Mode will be shown in the main menu as pictured below.
9-08. Adv Setup
Link Option
Press ENT and the LCD will display the available options as shown below. The default is "Menu
On" and 7. USB Mode will appear in the main menu.
Link Option
Menu On
If set to "OFF" using the Up and Down buttons, the 7. USB Mode option will not appear in the
main menu.
Attention: This is Function 9.8 of 1-1 HDD duplicator.
3.10.12 USB Auto-Link – requires AEC-4420DX (1-1 HDD duplicator only)
This function sets the 1-1 HDD duplicator to immediately enter USB mode on startup. This
allows direct control via PC as shown below.
8-09.Adv Setup
USB Auto-Link
Press ENT and the LCD will display the available options as shown below. The default is "OFF".
USB Auto-Link
OFF
Attention: This is Function 9.9 of 1-1 HDD duplicator.
17