Audiovox CDM 8410 - Manual (Page 20)

SPEED DIALING SPEED DIALING
ONE-TOUCH/TWO-TOUCH DIALING
Ideal for frequently dialed numbers, this feature allows
phone book entries to be dialed via the keypad with only
one or two key presses. To store a number in speed dial:
ONE-TOUCH DIALING:
Links a phone number from the phone book to a location
number and enables you to call that number simply by
pressing its location number from the idle mode.
1-9 : Press the corresponding memory number and hold
for more than 1 second.
TWO-TOUCH DIALING:
10-20 : Press the first digit and second digits of the
memory number short and long respectively.
● If no phone number is stored in the location entered,
“There is no number” will appear on the screen.
● If a phone number is stored in secret, you must enter
the password to make a call.
Chapter 3 - Page 37
NUMERIC MODE [123]
Numeric mode allows you to add a number to your
entry/message. To select numeric mode from the Editor
screen press then select [123].
TEXT INPUT METHODS TEXT INPUT METHODS
SYMBOL MODE [SYM]
Symbol mode allows you to add various symbols to
your entry. Whether you are adding an e-mail address
to your phone book or sending an expressive mes-
sage, symbols make these entries easier.
To select symbol mode from the Editor screen press
then choose [SYM].
The symbols will appear on the display.
The corresponding key number for that symbol will
appear as well. You can press the key to select the
symbol .
To move to the next screen of symbols press .
Page 36 - Chapter 3
1. Press [MENU] .
2. To assign a phone number to a location, select the
location then press [OK].
3. Select the group where the phone number is saved
then press [OK].
4. Select the entry then press [OK], select the phone
number and press [OK] again.
● If a phone number is already assigned to the location,
press [DEL] and the Navigation Key to delete.
CDM-8410_USC_M_040114A 2004.1.19 5:48 PM Page 38