SawStop T-Glide Fence System - Manual (Page 10)

Installing Your T-Glide Fence System
SawStop , the S awStop blade log o, and the
configura tion of th is product are eith er regist ered trademar ks or t rademar ks of S awStop, LLC. Software copyrigh t 2003-2 006 by S awStop, LLC. All rights reserved . Protect ed by on e or mo re of the follo wing U. S. paten ts 68139 83, 682 6988, 6857345 , 6877410 , 688044 0, 69208 14, 69451 48,
6945149 , 6957601 , 699400 4, 69970 90, 70005 14,
7024975 , 705541 7, 70770 39, 70988 00, 71004 83,
7137326 , 7171879 , 719796 9, 72103 83, 72257 12,
7228772 , 723185 6 and T aiwan p atent 14 3466.
Additiona l U.S. an d foreign patents pending.
! WARNING
Do not r emove th e dust s hroud be cause
the blade will be ex posed. If you contac t the
blade unde r the tabl e, the blad e may ret ract
toward y ou and cause a severe i njury.
15. Repeat the process described in the previous step to level the rear edge of the extension table to the cast iron
table top (see Fig. 15).
16. Turn the foot on the bottom of each support leg to adjust its position until it is in solid contact with the ground.
Once the foot is in contact with the ground, fully tighten the hex nut against the bottom of the leg using a
13 mm wrench (see Fig. 16).
Fig. 15
Fig. 16
adjust the position of
the foot and tighten
the hex nut
straight-edge
8 SawStop T-Glide Fence System - Professional Series