beautypg.com

4c 5 6 – Rivera Primo 1056-0002 Pro Clutch (PC-10000-A) User Manual

Page 3

background image

3

STEP 6:

Next clutch in is a friction(as shown above) then

steel, alternating until all the plates are installed!

STEP 5:

First plate installed is the .120” steel plate. It goes

all the way to the rear of the clutch hub

STEP 4C:

Install the clutch basket/hub assembly onto the transmis-

sion main-shaft using two drops of Rivera’s Blue thread-

lock or equal and tighten the clutch hub nut to 50-60 foot-

pounds of torque.

ATTENTION!

If the clutch is to be operated in an oil bath,

it is recommended that the friction plates be

soaked in primary lubricant for 15-20 min-

utes. Wipe off excess lubricant prior to

installation.

Rivera Pimo recommends using Dextron III

ATF (Automatic Transmission Fluid) in the

primary for best performance with the Pro

Clutch.

4C

5

6

PC-1000-A PRO-CLUTCH INSTRUCTIONS_PC-1000-A PRO-CLUTCH#2A72D0.qxd 2/15/12 4:03 PM Page 3