APC Switched Rack Power Distribution Unit (PDU) - Manual (Page 39)

® ® ® ®
USER
’S GUIDE
switched rack pdu
35
Configure Device Settings
Web interface.
Select Device Settings on the Switched Rack PDU
menu, click the Configure button and configure the Name and Location
fields for the PDU, and set the Coldstart Delay.
Control console.
1. Select Outlet Control/Config from the Device Manager menu.
2. Select Master Control/Config from the displayed list.
3. Select Master Outlet Configuration from the next menu displayed.
4. Change the Name, Location, or Coldstart Delay from this menu.
To change the Name, Location, and Contact fields in the
control console, see
Identification .
Setting Description
Name Set the name of the PDU.
Location Set the location of the PDU.
Coldstart Delay
The time that the Switched Rack PDU delays applying power to
the outlets after AC power has been applied to the PDU.