APC Switched Rack Power Distribution Unit (PDU) - Manual (Page 35)

® ® ® ®
USER
’S GUIDE
switched rack pdu
31
Configure outlet settings and outlet name
Web Interface.
To configure the outlet settings and outlet name:
1. Select the Configuration option of the Outlets menu, and click the
Configure button.
2. Select the check boxes next to the numbers of the outlets you want to
modify or select the All Outlets checkbox.
3. Enter values for Power On Delay, Power Off Delay, or Reboot
Duration and click the Apply button below the list to apply the
changes to the selected outlets.
On the same menu, select the outlets you want to rename, and enter a
Name and Link for the selected outlets. Click the Apply button to accept
the changes.
Off Delayed
Remove power from each selected outlet according to its value
for Power Off Delay.
Reboot Immediate
Remove power from each selected outlet. Then apply power to
each of these outlets according to its value for Reboot Duration.
Reboot Delayed
Remove power from each selected outlet according to its value
for Power Off Delay. Wait until all outlets are off (the highest
value for Reboot Duration), and then apply power to each outlet
according to its value for Power On Delay.
Cancel Pending
Commands Cancel all commands pending for the selected outlets and keep
them in their present state.
Option Description
Some screens have more than one Apply button. Click the
button immediately below the list to which you made
changes.