Environmental conditions – Nilfisk-ALTO RS 850 User Manual
Page 127
USER MANUAL
ENGLISH
RS 850
33014576(4)2008-02 A
13
AGIP ARNICA SPECIFICATIONS
46
32
Approvals and specifi cations
Viscosity at +104°F (+40°C)
mm
2
/s
45
32
ISO-L-HV
Viscosity at +212°F (+100°C)
mm
2
/s
7.97
6.40
ISO 11158
Viscosity index
/
150
157
AFNOR NF E 48603 HV
Flash point COC
°F (°C)
419 (215)
395.6 (202)
AISE 127
Pour point
°F (°C)
-32.8 (-36) -36 (-32,8)
ATOS Tab. P 002-0/I
Density at +59°F (+15°C)
kg/l
0.87
0.865
BS 4231 HSE
CETOP RP 91 H HV
COMMERCIAL HYDRAULICS
Danieli Standard 0.000.001 (AGIP
ARNICA 22, 46, 68)
EATON VICKERS I-286-S3
EATON VICKERS M-2950
DIN 51524 t.3 HVLP
LAMB LANDIS-CINCINNATI P68, P69 and
P70
LINDE
PARKER HANNIFIN (DENISON) HF-0
REXROTH RE 90220-1/11.02
SAUER-DANFOSS 520L0463
DOT4 SPECIFICATIONS
Approvals and specifi cations
Viscosity at -40°F (-40°C)
mm
2
/s
1.300
SAE J 1703
Viscosity at +212°F (+100°C)
mm
2
/s
2.2
FMVSS 116 - DOT4&DOT3
Dry boiling point
°F (°C)
509 (265)
ISO 4925
Wet boiling point
°F (°C)
338 (170)
CUNA NC 956 DOT4
Density at +59°F (+15°C)
kg/l
1.07
Colour
/
Yellow
Climate control system data
Values
Gas type
Reclin 134a
Gas quantity
1.76 lb (0.8 kg)
Salt spreader system description (optional) (*)
Values
Make - type
Epoke - PM 1.4
Snow brush description (optional) (*)
Values (*)
Make - type
Tuchel - ZKM
Camera kit description (optional) (*)
Values (*)
Make - type
IMEL - Car Vision System
(*) For other data/values of the optional equipment, see the relevant Manuals.
ENVIRONMENTAL CONDITIONS
In the environment where the machine operates, there must not be any danger of explosion.
To avoid inhaling exhaust gas, the machine must be used only where there is a proper ventilation.
The machine operates correctly (*) in the following environmental conditions:
Temperature: +14°F to +104°F (-10°C to +40°C)
Humidity: 30% to 95%
(*) When using the machine at ambient temperatures between +14°F and +32°F (-10°C and 0°C), the dust control system cannot
be used; moreover the water tanks and the dust control system itself must be empty.
–
–
–
•
•