beautypg.com

Machine description – Nilfisk-ALTO RS 850 User Manual

Page 122

background image

ENGLISH

USER MANUAL

8

33014576(4)2008-02 A

RS 850

MACHINE DESCRIPTION

OPERATION CAPABILITIES

This sweeper has been designed and built to be used by a qualifi ed operator to clean (by sweeping and suctioning) roads, smooth
and solid fl oors, in civil and industrial environments, and to collect dust and light debris under safe operation conditions.
The machine can also be used as salt spreader and for snow removal when supplied with proper equipments.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with reference to the operator’s position, while on the driver’s seat (14, Fig.
E).

DESCRIPTION

Description of the control area
(See Fig. D)

Meter and control panel

1.

Indicator light panel
Optional indicator light
High beam indicator light
Running light indicator light
Turn signal indicator light
Charged battery indicator light
Engine oil pressure warning light
Engine coolant high temperature warning light
Low fuel warning light
Glow plug pre-heating warning light
Parking brake warning light
Clogged engine air fi lter warning light
Water-in-fuel warning light
Fuel level indicator
Engine coolant temperature indicator
Display showing:

Working hours (when the ignition key is turned on the
fi rst position, before running the engine)
Engine speed (when the engine is running and the
charged battery warning light is off)

The display can also show the following acronyms:

F.OPE: it indicates that the fuel level indicator cable is
not connected
F.COr: it indicates that the fuel level indicator cable is
shorted
H.OPE: it indicates that the engine coolant temperature
indicator is not connected
H.COr: it indicates that the engine coolant temperature
indicator is shorted

Lifted hopper warning light (red)
Dust control system low water warning light (yellow)
Hazard warning light switch
Hopper lid opening/closing switch
Front skirt lifting switch
Windscreen washer switch
Ignition key
Right fuse box
Drive pedal
Dust control system water pump switch:

When the switch is turned to the fi rst position, the
nozzles sprinkle a medium quantity of water
When the switch is turned to the second position, the
nozzles sprinkle the maximum quantity of water

2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.

18.
19.
20.
21.
22.
23.
24.
25.
26.
27.

Steering wheel
Side brooms (fi rst position) and 3rd broom (second
position) switch
Upper/lower headlight selector
Brake pedal
Windscreen wiper fl uid tank (*)
Windscreen wiper switch (*)
Left fuse box
Combination switch, having the following functions:

Headlights off, with mark (35b) at the symbol O
Running lights on, with mark (35b) at the symbol
Low beam on, with mark (35b) at the symbol
High beam on, with mark (35b) at the symbol

and

lowered lever (35a)
High beam temporary on, lifting the lever (35a)
Right turn signal on, bringing the lever (35a) forward
Left turn signal on, bringing the lever (35a) backward
Horn activation, pushing the lever (35a) in the direction
shown by the arrow (35c)

Suction inlet, brooms, hopper joystick
Suction inlet and side broom lowering push-button
Suction inlet and side broom lifting push-button
Hopper return push-button
Hopper dumping push-button
Suction inlet and side broom left shifting push-button
Suction inlet and side broom right shifting push-button
Hopper lifting push-button
Hopper lowering push-button
Safety push-button (press and hold it to activate the other
push-buttons on the joystick)
3rd broom joystick, to activate the following functions (after
pressing the 3rd broom switch):

Forward: 3rd broom lowering
Backward: 3rd broom lifting
Right side: arm to the right side
Left side: arm to the left side

(*) In the machines with right-hand drive, these components

are on the right side of the steering wheel.

28.
29.

30.
31.
32.
33.
34.
35.







36.
37.
38.
39.
40.
41.
42.
43.
44.
45.

46.