Nilfisk-ALTO RS 850 User Manual
Page 126
ENGLISH
USER MANUAL
12
33014576(4)2008-02 A
RS 850
Diesel engine data (*)
Values
Make
VM MOTORI
Type
D703 TE2 EPA/CARB
Cylinders
3
Displacement
127.0 in
3
(2,082 cm
3
)
Maximum speed
2,600 rpm
Maximum working speed
2,050 rpm
Maximum power
64.4 Hp (48 kW)
Idle speed
1,000 rpm
Engine coolant
50% of AGIP antifreeze and 50% of water
Antifreeze type
AGIP Antifreeze Extra (**)
Engine oil type
AGIP Sigma Turbo 15W40 (***)
Engine oil pan capacity (maximum/minimum)
12.0/10.0 lb (5.45/4.45 kg)
(*) For other diesel engine data/values, see the relevant Manual.
(**) See the coolant technical data and reference data tables below.
(***) See the engine oil technical data and reference data tables below.
AGIP ANTIFREEZE EXTRA SPECIFICATIONS
Approvals and specifi cations
Boiling point
°F (°C)
338 (170)
CUNA NC 956-16 97
Boiling point in solution with 50% water
°F (°C)
230 (110)
FF.SS cat. 002/132
Freezing point in solution with 50% water
°F (°C)
-36.4 (-38)
ASTM D 1384
Colour
/
Turquoise
blue
Density at +59°F (+15°C)
kg/l
1.13
AGIP SIGMA TURBO 15W40 SPECIFICATIONS
Approvals and specifi cations
SAE QUALITY
/
15W40
ACEA E3-96
Viscosity at +212°F (+100°C)
mm
2
/s
13.7
API Service CG-4/SG
Viscosity at +104°F (+40°C)
mm
2
/s
100
CCMC D5, PD-2
Viscosity at +5°F (-15°C)
mm
2
/s
3,300
US Department of the Army MIL-L-2104 E
Viscosity index
/
138
US Department of the Army MIL-L-46152 E
Flash point COC
°F (°C)
446 (230)
MACK EO-L
Pour point
°F (°C)
-16.6 (-27)
MAN M 3275
Density at +59°F (+15°C)
kg/l
0.885
Mercedes Benz 228.3
VOLVO VDS2
MTU typ 2
Refuelling data
Values
Fuel tank capacity
17.2 USgal (65 litres)
Hydraulic system oil tank capacity
14.3 USgal (54 litres)
Electrical system data
Values
System voltage
12 V
Starting battery
12 V – 100 Ah
Hydraulic system data
Values
Maximum drive system pressure
4,351 psi (300 Bar)
Suction fan system maximum pressure
3,046 psi (210 Bar)
Maximum accessory system pressure
1,595 psi (110 Bar)
Hydraulic system oil viscosity [at ambient temperatures above +50°F (+10°C)] (*)
46 cSt
Hydraulic system oil type
AGIP Arnica 46 (**)
Brake fl uid type
DOT4 (***)
(*) If the machine is to be used at ambient temperatures below +50°F (+10°C), the oil should be replaced with equivalent oil
having a viscosity of 32 cSt. For temperatures below +32°F (0°C), use oil with lower viscosity.
(**) See the hydraulic system oil technical data and reference data tables below.
(***) See the brake fl uid technical data and reference data tables below.