Myron L PS6 User Manual
Page 7
3
C. Specification Chart
The LSI Calculator hardness range is limited to 0.0 - 1710 ppm and
0.0 - 100 grains of hardness.
D. Warranty/Service
The Myron L P
ool
P
ro
™, excluding the pH/ORP sensor, has a Two (2)
year limited warranty. The pH/ORP sensor has a six (6) month limited
warranty for materials and workmanship. If an instrument fails to operate
properly, see Troubleshooting Chart, pg. 30. The battery and pH/ORP
sensor are user-replaceable. For other service, return the instrument
prepaid to the Myron L Company.
MyRON L COMPANy
2450 Impala Drive
Carlsbad, CA 92010-7226 USA
+1-760-438-2021
E-Mail: [email protected]
www.myronl.com
If, in the opinion of the factory, failure was due to materials or workmanship,
repair or replacement will be made without charge. A reasonable service
charge will be made for diagnosis or repairs due to normal wear, abuse
or tampering. This warranty is limited to the repair or replacement of the
P
ool
P
ro
only. The Myron L Company assumes no other responsibility
or liability.
0.01 (<100 ppm)
0.1 (<1000 ppm)
1.0 (<10 ppt)
0.01 (<100 ppt)
0.1 (<200 ppt)
0-9999 ppm
10-200 ppt
in 5 autoranges
0-9999 µS/cm
10-200 mS/cm
in 5 autoranges
±1% of reading
±1% of reading ±1% of reading
0.01 (<100 µS)
0.1 (<1000 µS)
1.0 (<10 mS)
0.01 (<100 mS)
0.1 (<200 mS)
0.1° C/F
.01 pH
1 mV
±0.1 °C
0-71 °C
32 - 160 °F
Auto
Temperature
Compensation
Resolution
Ranges
0-14 pH
±999 mV
Accuracy
±.01 pH**
±1 mV
0-71 °C
32 - 160 °F
0-71 °C
32 - 160 °F
0-71 °C
32 - 160 °F
0-71 °C
32 - 160 °F
Conductivity
pH
ORP
Free Chlorine
Mineral/Salt*
Temperature
TDS
0-9999 ppm
10-200 ppt
in 5 autoranges
0.01 (<100 ppm)
0.1 (<1000 ppm)
1.0 (<10 ppt)
0.01 (<100 ppt)
0.1 (<200 ppt)
Cond/TDS
Ratios
Preprogrammed
KCl, NaCl, 442™
0.2-
9.9 ppm
0.1 ppm
± 2.5% of
reading
ppm***
*NaCl - Sodium Chloride
** ± .2 in the presence of RF fields
≥ 3 V/m and > 300 MHz
***Given water is sanitized by chlorine only within 5