Myron L PS6 User Manual
Page 30

26
Plug in your dongle and install per
manufacturer’s instructions.
For computers with
Bluetooth capability/
Bluetooth dongle installed:
First time use of the bluDock:
1.
Press any parameter button
to turn the P
ool
P
ro
on.
2.
Put the P
ool
P
ro
in “PC
On” mode by pressing the
key until “PC OFF”
appears (see Figure 30).
3.
Then press the key.
“PC On” will be displayed
(see Figure 31).
NOTE: “PC Ini” may momentarily be displayed while initializing (see
Figure 32).
4.
Add bluDock to your
Bluetooth devices per your
operating system procedure.
ThE BLUDOCK DEVICE
PASSKEy IS 1234.
5.
After pairing, note the number
of the COM port assigned
by the computer.
In Windows XP, note the number of the
outgoing COM port assigned by the computer.
NOTE: The unit will automatically power down after 60 sec. If the unit
powers down during pairing, repeat steps 1-3 above and continue.
C. Memory Stack Download
1.
With the P
ool
P
ro
in “PC On” mode, open the U2CI
software application.
2.
Verify that the port selected matches the COM port number noted
(first time only). This is the outgoing COM port on Windows XP.
3.
In the U2CI application, click on the data download button. A
data transfer bar will appear while the data is being downloaded.
Once downloaded, the data may be manipulated, printed or stored within
the Myron L U2CI application, or the data may be exported to another
more powerful spreadsheet
†,
such as Excel*.
†
Please Note: Although the Myron L Company has performed extensive
Figure 30
Figure 31
Figure 32