Beijer Electronics MTe Nautic EN - Manual (Page 40)

Operation
40 Beijer Electronics, MAEN983B
6.3.6 General Characteristics
Standby and Hibernate, Shut Down and Restart
If the PC that the d.client USB is connected to is set in standby or hibernate
mode, the display goes blank. When the PC is powered up again (and unlocked
if necessary), the connected display returns to the same mode as before standby
or hibernation.
If the PC is shut down, restarted and logged in to, the connected display returns
to the same mode as before shutdown.
d.client USB with Multiple Users
d.client USB work with multiple users on the PC. The mode settings are saved
for each user, thus allowing individual desktop configuration.
Disconnecting the d.client USB
If the d.client USB is powered off or the USB cable is removed from the PC, the
display goes blank. All windows and icons move to the primary screen. On re-
connection or powering up of the d.client USB, the display returns to the same
mode as before disconnection.
However, windows and icons that were previously on the screen will not be
moved back.