Beijer Electronics MTe Nautic EN - Manual (Page 28)

Operation
28 Beijer Electronics, MAEN983B
6.2.6 Image Adjustment Menu
The Image Adjustment settings are available only if RGB analog is selected as
input.
Press Enter or down to enter the Image
Adjustment menu.
Use left or right buttons to select Image
Auto-adjust, Horizontal Width, Phase,
Horizontal Position or Vertical Position.
Press Enter or down to confirm.
Select Exit or up to return to the icon bar.
Horizontal Width
Use left or right buttons to adjust the image
size manually.
Press Enter or down to confirm, or Esc to
cancel.
Note:
Image Auto-adjust is available only if RGB analog is selected
as input. This function adjusts the image on the display includ-
ing phase and horizontal/vertical position. The result has to
be confirmed by selecting either Yes or No using the left or
right buttons.