Beijer Electronics MTe Nautic EN - Manual (Page 24)

Operation
24 Beijer Electronics, MAEN983B
6.2.2 System Messages
The following system messages may be displayed:
6.2.3 Input Selection Menu
Press Enter or down to enter the Input
Selection menu.
Use left or right buttons to select RGB Ana-
log, DVI or UGA (USB) input.
Select Exit or up to return to the icon bar.
System message Description
The system is booting up.
There is no signal at DVI or RGB input.
Reason: PC is off or in sleep mode or cable is not con-
nected to graphics card
There is no cable connected to the RGB input.
There is no cable connected to the DVI input.
There is no cable connected to the USB input.
Provided signal/resolution at DVI or RGB input is not
supported.