Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 40)

Interfaces and Functions
40 Beijer Electronics, MAEN956
9.11 Remote Power
Target Application
This switch is used to control (off and on) the picture signal giving PCs remote-
ly. The MT 230 Nautic Monitor has an appropriate input, so that the OFF/ON
goes from monitor and PC synchronously, the PC should switch itself on auto-
matically when putting on supply voltage.
Function
The contact is closed if the power key is pressed approximately 1 second, and
opens again if the power key is released.
Plug
2-pin Phoenix plug with “screw safety lock” RM3,81 for lines to 1.5 mm².
Connection
Connection Data
Relay contact 24 V DC/1A or 230 V AC/0.1 A.
Pin Function Description
1 Remote-Power Normally open contact 1
2 Remote-Power Normally open contact 1