Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 11)

Description of Parts
Beijer Electronics, MAEN956 11
4 Description of Parts
The buttons on the front are explained below:
Button Instruction
OSD menu Press the + or the SET button to open the Quick OSD Menu to make
basic settings.
Press the MENU button to open the full
OSD Menu to make advanced
settings.
ECDIS key With the ECDIS key the brightness as well as the colors are set on a cer-
tain default value. The LED is lit when ECDIS mode is on.
Note:
If the ECDIS key is activated (LED on) all other keys (dimmer, OSD) are
inactivated and cannot be operated. Additionally, no commands and/or
programming over the serial and/or Ethernet interface can be made.
Dimmer
button Press the - button to decrease the contrast.
Press the + button to increase the contrast.
Power
button Press the button to turn the monitor on/off without disconnecting the
power supply. The LED is lit when the monitor is on.
USB port
Power button
Dimmer button
ECDIS key
OSD menu
buttons