Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 12)

Quick OSD Menu
12 Beijer Electronics, MAEN956
5 Quick OSD Menu
Press the SET or the + button among the OSD (On Screen Display) menu but-
tons to make basic settings from the Quick OSD menu. Then use the buttons
for the following functions:
Button Function Explanation
MENU No function in the Quick OSD menu
SET Opens the Quick OSD
menu to adjust con-
trast, brightness, zoom
and split screen Brightness adjustment range: 0-100
Contrast adjustment range: 0-100
Zoom adjustment range: 0-100
Zoom for split screen window is available
from submenu.
Selection for split screen size (PIP): small,
medium or large
+ Opens the Quick OSD
menu to select input
source or to perform an
automatic screen align-
ment Select RGB1, RGB2, Digital, FBAS or S-video
using SET for navigation and + for selection.
Press + again to perform an automatic
screen alignment including frequency, phase
and picture position.
Increases values
- Decreases values