Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 25)

Interfaces and Functions
Beijer Electronics, MAEN956 25
9 Interfaces and Functions
Interface Description
Analog IN See section 9.8 Analog IN for details.
Composite video Second video source, for Picture in Picture function.
See section
9.1 Composite Video for details.
Digital IN See section 9.9 Digital IN for details.
Digital OUT See section 9.10 Digital OUT for details.
DIP switch Serial mode (RS232/RS485) + monitor address.
See section
10 DIP Switches for details.
DVI First video source alternatively.
See section
9.4 DVI for details.
Earth screw See section 11.1 Protected Ground for details.
Power supply See section 11 Power Supply for details.
Remote power See section 9.11 Remote Power for details.
S-video Second video source, for picture-in-picture function.
See section
9.2 S-Video for details.
USB PC USB “connect through” function.
See section
9.7 USB for details.
USB-A/USB-B USB 2.0 hub. See section 9.7 USB for details.
VGA First video source. See section 9.3 VGA for details.
Remote power
DVI VGA
USB-A/USB-B
Power supply
Earth screw
Composite
video
S-video
DIP switch USB PC
LAN
Ethernet
COM A COM B
Digital OUT
Digital IN
Analog IN