Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 36)

Interfaces and Functions
36 Beijer Electronics, MAEN956
9.7 USB
USB (Universal Serial Bus) is a bus system for connection of external devices for
data exchange with the PC. A large number of types of mouse devices, key-
boards, USB memory sticks and cameras can be connected and automatically
recognized.
The number of USB connections can also increased by USB hub.
Function
The interface labeled USB PC is used to connect the monitor to the PC.
There is also a USB 2.0 hub available on the back for connection of devices
The location of the USB interfaces are described in section 9 Interfaces and
Functions .
USB Connection
Front USB Port
The USB port on the front is intended for direct connection to devices such as
keyboard, mouse or memory stick, for fast and simple operation and/or data
handling. If the USB slot is not used, IP65 protection is kept with a rubber cap.
Note:
A maximum distance of 5 meters is appropriate for individual devices without am-
plifier.
Pin Function Description Pin Function Description
1 VBUS +5 V DC 3 D+ Data+
2 D- Data- 4 GND Ground
Front Top Front Top
4 3 2 1
1
4
2
3