AZEK Bench Planter - Manual (Page 4)

Screws fastened from
smooth side of deck
board.
Assemble Bottom Frame
Assemble Planter Sides (x4 Per Planter)
26”
Step 8
#10 3/4” Flat Head
Phillips Wood Screws
(x32 Per Planter)
26 7/16”
45°
3 3/8”
24 3 / 4 ” min.
Step 7
26 7/16”
45°
3 3/8”
24 3 / 4 ” min.
Step 7
Use Deck Board
(x4 Per Planter)
#10 x 3/4”Flat Head
Phillips Wood Screws
(x8 Per Planter)
Angle
Bracket
(x4)
Bottom Corner
Bracket (x4)
Center Boards with
Respect to thru hole
1
Planter
Bottom & Middle
Corner Casting
(x4)
Panel Support
(x8 Per Planter)
2
Planter
Important: No
Gapping.
Smooth Side
Smooth Side
Smooth
Side
#10 x 3/4”Flat Head Phillips Wood
Screws (x4 Per Planter)
#10 x 3/4” Flat Head
Phillips Wood Screws
(x4 Per Planter)
Flip Bottom Frame to add fasteners in next step.
#3
#3
BENCH/PLANTER INSTALLATION GUIDELINES for
Arbor Collection ‰ / Harvest Collection / Terra Collection ‰ Page 4
1. Attach Bottom & Middle
Corner Casting to one end of
each deck board.
3. Add Angle Bracket and
Bottom Corner Bracket.
4. The Bottom Frame is now complete.
2. Flip the Bottom
Frame to add
screws.
1. Use Deck Board
from cut list.
(x16 Per Planter)
© 2011 All rights reserved. AZEK Building Products, Inc. www.AZEK.com