Vaddio WallVIEW HD-22 and WallVIEW HD-30 - Manual (Page 4)

WallVIEW HD-22 and HD-30 SR Systems
WallVIEW HD-22 and HD-30 SR Cameras Systems - Document Number 342-0643 Rev A Page 4 of 20
O VERVIEW
The impressive Vaddio PowerVIEW HD-22 and HD-30 high
definition PTZ cameras are available in the versatile Vaddio
WallVIEW SR (short range) package. The WallVIEW HD-22 SR
and the WallVIEW HD-30 SR feature 22X and 30X power zoom
optics respectively. These cameras use the latest
Maicovicon
1MOS, 1/2.8-Type, progressive scan image sensors, which provide
for better light sensitivity, increased noise reduction and lower
power consumption than cameras with either CCD or CMOS image
sensors. This advanced MOS image sensor captures vivid colors,
delicate gradation and realistic textures that are comparable to 3-
chip camera performance.
Both the HD-22 and the HD-30 provide matchless low-light
capabilities with a minimum illumination rating of an amazing 0.4 lux
(color) and 0.3 lux (B/W). Equipped with a 2.2 megapixel MOS
sensor, the cameras deliver native 1080p/60 high definition video
resolution and superior color reproduction for use in any
professional A/V presentation, videoconferencing, House of
Worship, education, live event and industrial applications.
The HD-22 has a powerful 22X multi-element glass zoom lens (f=4.3mm to 94.6mm) and works exceptionally in
large rooms. However, the premium optics also provides a super-wide horizontal field of view of 65.2º, which
works very well in small room video applications. The HD-30, as one can imagine, has a robust 30X optical
power zoom lens that enables the capture of brilliant and detailed video images even in the largest rooms.
The cameras output multi-format HD video in both analog component (YPbPr), HDMI and differential formats in
HD resolutions of 1080p/59.94, 1080p/50 1080p/29.97 1080p/25, 1080i/59.94, 1080i/50, 720p/59.94, 720p/50 and
SD resolutions of 480p/59.97 and 576p/50. Both cameras are offered in WallVIEW SR packages with the Quick-
Connect SR Interface, which uses HSDS™ for distribution of video, power and control over Cat-5 cable up to 100’
(30.48m). The WallVIEW HD-22 and HD-30 cameras represent an exceptional value and are superb performers
for the most demanding video applications.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. The use of a power supply other than the one provided or
outdoor operation has not been tested and could damage the device and/or create a potentially unsafe operating
condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of
electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for proper pin-outs prior to use and connection to Vaddio product.
Image: WallVIEW HD22 or HD-30 SR System with
the CONCEAL Mount for a clean installation.