Vaddio Quick-Connect PRO and WallVIEW PRO for AW HE120 User Manual
Page 6

Quick-Connect PRO and WallVIEW PRO for the AW-HE120 Camera
© 2012 Vaddio - All Rights Reserved. Document Number 342-0497 Rev A
Page 6 of 16
Anatomy of the Quick-Connect PRO System Interface
Image: Quick-Connect PRO Front Panel Indicator (left to right)
Power Light: Illuminates when the power supply is plugged in the back of the Quick-Connect
This concludes our tour of the front panel.
Image: Quick-Connect PRO Rear Panel Connectors and Controls (left to right)
Power Supply Input:
The Quick-Connect PRO uses a 36VDC, 2.78 Amp power supply on a 5.5mm OD x 2.5mm ID connector.
Power on RJ-45: Power is provided on a Cat-5 cable to EZIM (EZCamera Interface Module) which, powers the
camera up to a distance of 500’ (152.4m)
Cam Select Dip Switches: Not applicable for AW-HE120 Systems - Leave All Switches Down.
IR Gain Multi-turn Encoder: Not applicable for AW-HE120 Systems
IR Output on 2-pin Molex 5.0mm Connector: Not applicable for AW-HE120 Systems
Y-Gain: Adjusts Y-Gain and allows the user to fine tune the video signal especially over longer cable lengths.
Adjust to taste and system requirements.
Distance: Distance Adjustments for Cat. 5 cable (<100’, 200’, 300’, 400’+) equalizes the length of the twisted
pairs for improved video performance.
Video Outputs on BNC-F Connectors: Three video signals at any one time can be transmitted from the EZIM
the Quick-Connect PRO The Panasonic system is equipped with HD breakout cable only. There is an optional
SD breakout cable available that will supply Y/C and Composite video.
Connector Labels and Supported Video Signals
Y/Y:
Y of YPbPr - or - Y (luminance) of Y/C on BNC-F connector
PB/C:
PB of YPbPr - or - C (chrominance) of Y/C on BNC-F connector
PR:
PR of YPbPr only on BNC-F connector
COMP:
Composite (CVBS) Video on BNC-F connector
Video RJ-45: This RJ-45 receives the camera’s three (3) differential video signals from the EZIM on the Video
Cat-5 cable.
Later on, in this exciting yet easy to understand manual, there will be some tips to
optimize the performance of the WallVIEW PRO HE120 and Quick-Connect PRO
HE120.