Vaddio WallVIEW CCU Z700 - Manual

Installation and User Guide
Camera and Electronic Products for Integrators
©2008 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and
pricing subject to change. Vaddio, WallVIEW, HSDS, Quick-Connect, EZIM, ProductionVIEW, PreVIEW, EZCamera and PowerRite are
registered trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number341-718 Rev. B
Q
UICK
-C
ONNECT
™ CCU Z700
WITH HSDS™
Vaddio™ Quick-Connect™ CCU for the Sony®
BRC-Z700 PTZ Camera
OVERVIEW
The Vaddio Quick-Connect CCU Z700 (Figure 1) is built for
use with the Sony BRC-Z700 high definition PTZ Camera.
The Quick-Connect CCU Z700 allows the user to control the
color output of the camera’s image sensor, through both Red
and Blue Gain knobs, Detail, as well as Iris and Gain levels, to
provide a higher quality image. In addition, there are also
Red, Green and Blue Enhance adjustments for added fine-
tuning of the cameras image. The system uses high speed
differential signaling (HSDS), an active transmission system
that delivers low-loss, high-quality video over CAT-5 cabling
distances up to 500 feet.
The Quick-Connect CCU Z700 system is capable of high definition (HD) 1080i resolution component video
and has a simultaneous SD composite video output in a variety of screen configurations. The BRC-Z700 is
capable of either NTSC or PAL formats.
The Quick-Connect CCU system also has many new features, including Tally illumination on the camera
which allows the presenter to know which camera is live, as well as Genlock delivered to the camera over
CAT-5. Other new features include the ability to store settings on two discrete Scene buttons, and buttons
for Auto White Balance, One Push White Balance and Auto Iris. Like all Vaddio Quick-Connect systems, the
Thin Profile Wall Mount and mounting hardware is included.
INTENDED USE
Before installing the Vaddio Quick-Connect CCU Camera System, please read the entire manual thoroughly.
All Vaddio camera systems are designed for use indoors. Outdoor operation is not recommended, has not
been tested, and could damage the camera and/or create a potentially unsafe operating condition. Use only
the Vaddio PowerRite power supply provided.
SAVE THESE INSTRUCTIONS
The information contained in this manual will help you install the Vaddio Quick-Connect CCU system. For
reference, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the website. These documents can be downloaded from
www.vaddio.com free of charge.
IMPORTANT SAFEGUARDS
Read and understand all instructions before using. Do not operate any electrical device if it has been
dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To
reduce the risk of electric shock, do not immerse in any liquids and avoid extremely humid conditions.
INFORMATION
For RS-232 control information, please see the full-length Technical Manual for the SONY BRC-Z700. This
manual can be found either on the Vaddio or Sony website. Vaddio has also prepared a number of
TechNotes, specifications and drawings designed to inform and educate integrators on the value and the
specific uses of Vaddio products.
Figure 1: Quick-Connect CCU Z700
System with Camera (not included), Wall
Mount and EZIM CCU (behind camera)
Use only the power supply provided with the Vaddio Quick-Connect
products. Use of any unauthorized power supply will void any and all