Vaddio ProductionVIEW FX - Manual (Page 3)

ProductionVIEW FX
ProductionVIEW FX Manual 341-451 Rev. C Page 3 of 16
Key Technical Features (continued):
 Video Transitions
Video transitions are truly seamless with exceptional video quality. The transition times are
assignable from zero (0) to four (4) seconds and include:
 Fades (in, out, fade to black with main off)
 Cross Fades (one image fades into another)
 Wipes (side to side, up and down and corner)
 Straight Cuts
 3-Axis Hall-Effect Joystick - High quality Hall-Effect joystick allows for control of Pan/Tilt (X/Y
coordinates) and the Zoom function (twist for Z or zoom axis). This non-contacting joystick uses
industrial quality magnets and sensors, providing solid, consistent performance throughout its entire
lifetime.
 Operator (manual) and Presenter (automatic) modes - In addition to a manual or “operator” mode,
an Automatic Camera Switching mode for switching to camera presets assigned to Vaddio input
triggers like the StepVIEW mats, AutoVIEW IR or TouchVIEW buttons is provided.
 Camera Control - Each camera input has individual control for Pan/Tilt/Zoom and auto/manual focus,
auto/manual brightness, backlight compensation and one-push automatic white balance.
 72 Total Camera Presets – 12 Presets per camera input channel are stored internally and are not
dependent on the internal presets of the camera.
 Master RS-232 Control Port - In addition to the six (6) discrete camera control ports, the Master
control port can be used to control any of the internal functions of the ProductionVIEW FX or for
software updates.
Intended Use:
Before operating the Vaddio ProductionVIEW FX, please read the entire manual thoroughly. The system
was designed, built and tested for use indoors, and with the provided power supply and cabling. The use
of a power supply other than the one provided or outdoor operation has not been tested and could
damage the camera and/or create a potentially unsafe operating condition.
Save These Instructions:
The information contained in this manual will help you install and operate your Vaddio ProductionVIEW
FX. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User
Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These
documents can be downloaded from
www.vaddio.com free of charge.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the
risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
 One (1) ProductionVIEW FX Camera Control Console, Part Number 999-5200-000
 One (1) Vaddio PowerRite 18 VDC, 2.75A Power Supply
 One (1) Vaddio AC Cord Set
 Documentation and Manuals
Use only the power supply provided with the ProductionVIEW FX system.
Use of any unauthorized power supply will void any and all warranties.