Vaddio AutoTrak 2.0 EasyTALK Wireless Audio Interface User Manual
Page 11
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface
Optional AutoTrak 2.0 EasyTalk Wireless Audio Interface - Document Number 342-0387 Rev B
Page 11 of 12
Command
Response
Argument
Available w/ DIP 7
Down
Description
5112
none
Y
Get mixer enabled
4112
00 – disabled
n/a
Mixer enabled response
01 – enabled
5113
none
Y
Get radio enabled
4113
00 – disabled
n/a
Radio enabled response
01 – enabled
5120
none
Y
Get power enabled
4120
00 – disabled
n/a
Power enabled response
01 – enabled
6101
00 – off
Y
Set mute on or off
01 – on
6102
00 – down
Y
Adjust volume by +1dB or -1dB
01 – up
6110
00 – disabled
N
Enable/disable compressor
01 – enabled
6111
00 - disabled
N
Enable/disable filter
01 – enabled
6112
00 – disabled
N
Enable/disable USB mix
01 – enabled
6113
00 – disabled
N
Enable/disable radio
01 – enabled
6114
01
N
Reset to factory default settings
6120
00 – off
Y
Power on/off
6121
00 – disabled
Y
Enable/disable command echo and prompt
01 – enabled
4100
none
n/a
Command complete response
4198 none
n/a
Invalid
argument
response
4199
none
n/a
Invalid command response
Help Menu:
>? - This Menu
AutoTrak 2.0 Audio Receiver V01.00.04
Compiled: 12-Apr-12 at 15:38:51
Commands:
5101 - Get mute status
(00-off, 01-on)
5102
- Get volume
(-16, 0 dB, 2-digit hex value: f0 is -16, f1 is -15, ff is -1, 00 is 0)
5110 - Get DRC enabled
(00-disabled, 01-enabled)
5111 - Get EQ filter enabled
(00-disabled, 01-enabled)
5112 - Get USB mix enabled
(00-disabled, 01-enabled)
5113 - Get radio enabled
(00-disabled, 01-enabled)
5120 - Get power on
(00-off, 1-on)
6101 xx - Set mute status
(xx: 00-off, 01-on)
6102 xx - Adjust volume 1dB
(xx: 00-down, 01-up)
6110 xx - Enable DRC
(xx: 00-disable, 00-enable)
6111 xx - Enable EQ filter
(xx: 00-disable, 01-enable)
6112 xx - Enable USB mix
(xx: 00-disable, 01-enable)
6113 xx - Enable radio
(xx: 00-disable, 01-enable)
6114 xx - Enable factory defaults
(x: 00-disable, 01-enable)
6120 xx - Power
(xx: 00-off, 01-on)
6121 xx - Enable serial echo
(xx: 00-off, 01-on)
?
- Print command list
NOTE: commands 611x available only if DIP 7 up
Reponses:
4199 - Unknown command
4198 - Invalid argument
41xx yy - Successful get (5xxx), xx matches command, yy is returned value
4100 - Successful set (6xxx)