Pulsafeeder Eclipse Model 75 - Manual (Page 49)

43
11.3 Eclipse Standard/Eclipse Hypo 12 General Specifications
Port Size and Type ¾” FNPT or ISO 7-1
Direction of Rotation Bi-directional
Theoretical Displacement 0.226 US gal / 100 rev. (8.6 cc / rev.)
Maximum Differential Pressure Carbon Bearing 100 psig (6.8 bar, 690 kPa)
Maximum Differential Pressure SiC Bearing 150 psig (10 bar, 1034 kPa)
Maximum Allowable Working Pressure Carbon Brg
and SiC Brg
200 psi (13.8 bar, 1379 kPa)
Maximum Speed 1750 rpm
Maximum Capacity at 0 psig 3.2 US gpm (12.1 LPM)
Maximum Viscosity 10,000 cps
Maximum Process Fluid Temperature 150 F (66 C) at maximum differential pressure
Minimum Process Fluid Temperature -40 F (-40 C)
Fluid pH Range 0-14
Gear Type Compact Spur Gear Design
Bearing Type Sleeve Bearing Integral Wear Plate
Magnetic Torque Rating 228 in-lbs. (25.7 N-m)
Motor Frame Sizes - NEMA 56C and 143/145TC
Motor Frame Sizes - IEC 63 and 80 B14 Face
Pump Housing Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Gear Materials of Construction Modified PTFE
Can Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Magnet Materials of Construction Neodymium Iron
O-ring Seal Materials FKM “A”
Approximate Weight 10.0 lbs. (4.5 kg) less motor
11.4 Eclipse Standard/Eclipse Hypo 25 General Specifications
Port Size and Type 1 inch ANSI 150# / DIN 20/25 Flanged
Direction of Rotation Bi-directional
Theoretical Displacement 0.479 US gal / 100 rev. (18.1 cc / rev.)
Maximum Differential Pressure 150 psig (10 bar, 1034 kPa)
Maximum Allowable Working Pressure 200 psi (13.8 bar, 1379 kPa)
Maximum Speed 1750 rpm
Maximum Capacity at 0 psig 6.5 US gpm (24.6 LPM, 1.5 m
3
/hr)
Maximum Viscosity 10,000 cps
Maximum Process Fluid Temperature 150 F (66 C) at maximum differential pressure
Minimum Process Fluid Temperature -40 F (-40 C)
Fluid pH Range 0-14
Gear Type Compact Spur Gear Design
Bearing Type Sleeve Bearing Integral Wear Plate
Magnetic Torque Rating 474 in-lbs. (53.5 N-m)
Motor Frame Sizes - NEMA 56C, 143/145TC and 182/184TC
Motor Frame Sizes - IEC 100/112 B14 Face
Pump Housing Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Gear Materials of Construction Modified PTFE
Can Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Inner Magnet Materials of Construction Neodymium Iron
O-ring Seal Materials FKM “A”
Approximate Weight 26.0 lbs. (11.8 kg) less motor