Pulsafeeder Eclipse Model 75 - Manual (Page 22)

16
14. Install front cover with spacer o-ring using the six bolts and washers. Tighten these bolts to the torque specified
in Section 12. Always tighten fasteners in a progressive “crisscross” pattern.
Figure 15
15. For IEC frame motors only, if it was removed, install the motor adaptor plate (item 31) onto the motor face using
the four bolts and washers (items 29 and 30). Always tighten fasteners in a progressive “crisscross” pattern.
Figure 16