Power Soak MX-220-H Owner's Manual - Manual (Page 7)

6
Requirements for Detergents and
Sanitizers
Detergents
Remember, improper detergents may damage equipment! Use of the correct detergent in
your Power Soak system is critical to its washing performance. If you are having problems
with cleaning results, please contact the factory.
Your new system requires a low-foaming, metal/aluminum-safe
detergent that is safe for the hands. The detergent should have good
grease cutting abilities but not have an excessively high pH level.
Sanitizers
The method of sanitizing used in your Power Soak system is a "chemical sanitizing"
method. There are a number of products on the market that work well. Your chemical sales
representative should assist you in selecting the proper sanitizer for your application.
Check with your cleaning chemical provider to determine detergent concentration, sanitizer
"parts per million" (ppm) and sanitizer submersion times to meet local health codes.
Factory Assistance
If your chemical sales representative is having difficulty selecting a detergent or sanitizer,
or if you are getting poor results with the chemicals your representative has recommended,
please contact the factory at 800-444-9624.