Power Soak MX-220-H Owner's Manual - Manual (Page 12)

11
Controls and Features
Start Button (green)
Starts the washing action and starts the timer. Your Power Soak sink will run for four
hours after this button is pressed.
Stop Button (red)
Stops the washing action and resets the timer.
Heat Switch (black on/off switch)
Turns on power to the heat control. The heat control measures the water temperature and
decides whether to heat the water more.
Digital Display (heat control)
Not visible on all models. Shows you the current temperature of the water. This will only
display when the heat switch is on.