Controls and features - continued, Starting and stopping the wash action, Introducing pots and pans to the powersoak – Power Soak MX-220-H Owner's Manual User Manual
Page 13: Properly scrapping pots and pans
12
Controls and Features - Continued
Starting and stopping the wash action
To start the wash action, press the green “START” button. A strong “rolling” wash action
should be present.
To stop the wash action, press the red “STOP” button.
Introducing Pots and Pans to the PowerSoak
Dirty pots and pans should be brought to the
Power Soak
in a timely manner. Do not allow
items to sit and air dry. The quicker that items are brought to the
Power Soak
and put in
the wash tank, the easier they are to clean!
Properly Scrapping Pots and Pans
Excess soils should be removed from the pots and pans prior to dropping them in the wash
sink.
Deposit the excess soils into a garbage can.
Some systems may have an optional pre-scrapping area with a pre-rinse spray. If so, soils
may be deposited into the scrapper sink.