Menukey2, Menukey : changing oven menu programs, Saving programs to a menukey – Merrychef 402s User Manual
Page 19
19
MenuKey : CHANGING OVEN MENU PROGRAMS
1
2
3
Lift the
MenuKey cover in the top front panel of
the oven and put the key in the slot.
The MenuKey System automatically changes all the cooking programs
on the oven from a pre-programmed electronic key.
To change the menus on the oven:
Ensure the power switch is
OFF.
With the key still in place switch the power switch
ON.
The oven will now go through the program download
sequence by displaying the following:
MENUKEY2
MenuKey Detected
Please Wait
WARNING
Downloading from a MenuKey will clear
all the existing programs
Check that the key has the correct
number/code for the programs you want
to load into the oven memory
Do not remove the key
during download sequence
as this could corrupt
the data on the key
Copying Programs from
MenuKey to Oven
Remove the MenuKey and keep in a safe place.
The display briefly will show the following : Oven Model No., Software & MenuKey Serial No.
The Oven will then commence heating up to the PREHEAT temperature ready to cook.
Verifying Programs
Copied Successsfully
MenuKey Copied
Successfully
4
Saving Programs to a MenuKey
EDIT CATEGORY NAME
CREATE MENUKEY
EDIT A PROGRAM
EDIT
CAT 005
CAT 006
CAT 007
CAT 008
CAT 001
CAT 002
CAT 003
CAT 004
CATEGORIES
In the
CATEGORIES screen select EDIT SCREEN ( Pad name hidden) then select CREATE MENUKEY
Copying Programs from
Oven to MenuKey
Verifying Programs
Copied Correctly
MenuKey Copied
Successfully
The Display returns to the CATEGORIES screen and the Oven will heat up to the PREHEAT
temperature ready to cook.
Set the Program Mode to
ON or OFF,
Set Manual Mode to
ON or OFF:
Enter the Lower Band temperature setting
45-135°F
Set the oven Temperature Scale
°C or °F
1
2
3
4
EDIT SCREEN
5
Insert a MenuKey and press START to copy the
programs.
The display shows the following:
For an explanation of the following features see
Setting the Oven Profile Page 13
Enter a number for the MenuKey Code to identify
the new MenuKey, use the +/- Function Pads.
WARNING
Any programs already
on the key will be deleted
START
MenuKey Code: 000
Program Mode : ON
Temperature Scale : °F
Manual Mode: OFF
Cooking Range: OFF
MENUKEY PROFILE