Merrychef 402s - Manual (Page 14)

14
CAT 005
CAT 006
CAT 007
CAT 008
Pizza
Donuts
CAT 003
Breads
CATEGORIES
Breads
PROG 053
PROG 054
PROG 055
PROG 056
Ciabatta
Roll
Croissant
Prog 052
RUNNING A PROGRAM
Up to 256 named Cooking Programs are available in 16 Category groups. Each Category
group can contain up to 16 programs. Programs can be loaded into the oven memory from a
MenuKey or entered from the control panel.
Press the program pad you wish to activate to
start cooking, the category & program name
and the remaining cooking time appear in the
display.
When the time reaches “00:00” the display shows cooking
completed and audible signal will be given.
Remove the food from the oven and close the door.
The oven heats up up to its pre-set temperature this will take
approximately 20 minutes.
The display will show the current oven cavity temperature.
The display will show the CATEGORIES screen when
cooking temperature is reached.
1
Switch the oven ON
3
2 Taking all the necessary precautions to en-
sure you do not burn yourself, place the food
into the hot oven cavity and close the door.
Always keep the period that the door is open
to a minimum.
Programs can be halted
and cancelled at any
time by pressing the
CANCEL key.
Note:
When the cycle is interrupted or
stopped the oven will remain at
the pre-set temperature and the
food inside the oven will continue
to cook
Hot surface
hazard
Using a cooking program
Press this pad for the second group of 8
programs in this category
(Programs 057-064)
Press this pad to start cooking us-
ing the program Roll shown in the
display
Program Category
Name: Breads
Press this pad for the second set of
Category groups ( 009 to 016 )
Press this pad to display the
programs in this category
Breads
Select a Program Category e.g. Breads
To start cooking select a Program Name e.g. Roll
example: Category BREADS, Program ROLL
BREADS
ROLL
01:35