Merrychef 402s - Manual (Page 13)

13
USING THE OVEN FOR THE FIRST TIME 2
The oven profile sets the following factors: operating temperature scale ( Centigrade or Fahrenheit ),
Oven Mode, Program protection, Bleep sound & Lower Temperature Band.
SETTING THE OVEN PROFILE
Switch the oven ON and press and hold the Lower
Right ( Edit Oven profile is hidden in the display )
function key to display OVEN PROFILE.
( Note: this screen is available for 5 seconds )
2
Switch oven OFF 1
1
PROGRAM MODE
OFF Programs are protected and cannot be edited.
ON Allows Programs to be edited and added,
MenuKey can be created
2
TEMP SCALE
The display shows the current Oven temperature
scale, Centigrade °C or Fahrenheit °F .
3
SOUNDER VOLUME
The length of the audible warning ‘bleep’ volume
can be adjusted from 1 to 5 (maximum).
5 LOWER BAND Temperature
The range of temperature lower than the
PREHEAT temperature inside which the oven
programs will still operate 30- 150°F (15-75°C)
Please note:
The Oven MODE default settings
are PROGRAM MODE OFF and
MANUAL MODE OFF.
PROGRAM MODE ON allows oven
settings to be altered and should only
be used to establish or edit programs
or to save programs to a MenuKey.
MANUAL MODE
OFF Manual controls are disabled. Only pre-set
Programs can be used
ON Manual controls operate the oven directly
from the control panel
Press Save to save the settings and exit
4
Note: The displayed logo may be different
if programs have been entered from a MenuKey
Edit Oven Profile
Lower Band 100 : °F
Save >>
Tempscale: °F
Program Mode: OFF
Manual Mode: OFF
Sounder Vol: 1
OVEN PROFILE
The display shows the current OVEN PROFILE setting, press the corresponding pad to cycle through
the options available then press Save to store the diplayed settings and exit this screen.