HOUNO KPE & CPE User Manual
Page 35
CPE & KPE – ver. 3.x – August 2009
35
By pressing Send programs to USB, you get the possibility of choosing a path for the
program package you wish to save to the USB key. It is possible to overwrite an
existing file or create a new file with a name matching the serial No. of the oven.
By pressing OK after selecting a
folder, you get to navigate in the
folder.
By pressing OK after choosing a
file name, the programmes are
saved to the USB key.
When an oven back-up, recipes or HACCP are saved to the key, they are saved in a
predefined file structure.
Oven settings and HACCP are saved in the folder ”Oven + serial No.” (in the below
example, the serial No. of the oven is 987654321).
As appears from the example, there is a Backup folder. In this folder, all the settings of
the oven are located.
The folder HACCP contains all HACCP runs.
It may be a good idea to frequently copy the contents of the USB key to the hard disk
to increase data safety.
Programmes are read and saved in the folder Programs.