HOUNO KPE & CPE - Manual (Page 16)

CPE & KPE – ver. 3.x – August 2009 16
Steps 1 and 2 are used after steaming/roasting at low temperatures.
Steps 3 and 4 are used after roasting at temperatures above 180ºC.
We recommend that CombiWash is used daily/after each production.
* Note that this mode is not active as standard.
CombiWash ® , Automatic Cleaning System
Press for indication of
level of detergent and
rinsing agent. Reading
and zero setting
(see page 29)*
How to do:
1. Check that the oven is not too hot (max. temperature: 80°C). If the oven is too hot,
use the cooling mode.
2. Check the level of detergent and rinse aid.
3. Select step
4. Close oven door and start programme by pressing the on/off key.
When the program is over, the oven automatically switches to an energy-saving standby
function.
If the oven is not connected to a soft water plant, CombiWash cannot function
properly.
Step up Step down