HOUNO KPE & CPE User Manual

Page 23

CPE & KPE – ver. 3.x – August 2009

Temperature down in
current step

Time down in current
step

Time up in current step

Possible setting of core
temperature probe in
current step

Active in ClimaOptima.
Reduce humidity
content in current step

Access to menu for
setting fan and exhaust

Down to submenu to
add, change or delete
step

Choose mode

Choose between ADD,
DELETE, CHANGE (2)

OK for change (active
in DELETE and ADD)

Choose mode

Editing steps

Move on to next step to
be edited

Return to previous
menu

Move on to next step to
be edited

Temperature up in
current step

Active in ClimaOptima.
Increase humidity
content in current step

Change between steps
(1) to the right

Change between steps
(1) to the left

(3) Back to upper menu
to adjust time, temp.,
etc

(1) The yellow square indicates which step should be edited or where a new step should be

added.

(2) “DELETE” deletes the step in the red square (1)

“CHANGE” changes the step in the yellow square (2)
“ADD” adds where the GREEN line is. If to the left, the new function becomes step 1; if to
the right, the new function becomes the last step.

(3) When the change has been made, use the upwards pointing arrow in the upper right-hand

corner to set time, temperature, etc in the new/changed step.